Auto-Trail Frontier Spezifikationen Seite 20

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 70
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 19
19
together we’re going places
When replacing a fuse, always replace a fuse with
the correct value. Never replace with a higher value
as this could damage the wiring harness. Details of
fuse ratings are in the back of this handbook.
Shutdown Button
The shutdown button is used to turn off the system
electronics when they are not required to save
battery power. The unit should be turned ‘off’ (button
out) when the vehicle is being put into storage or not
being used for long periods of time.
Before using the system please ensure that the
system shutdown button is in the ‘on’ position
(button in).
Power Button
The Power button turns on the leisure power. Press
the button once to turn on the 12 volt power – the
LED will illuminate, press the button again to turn off
the 12 volt power - the LED will go out.
The power button must be in the ‘on’ position for any
of the 12 volt systems to operate.
Pump Button
The pump button turns on the 12 volt water pump
circuit. Press the button one to turn on the water
pump - the LED will illuminate, press the button
again to turn off the pump – the LED will go out.
Light Button
The light button turns on the main internal 12 volt
lights. Press the button once to turn on the main
lights – the LED will illuminate, press the button
again to turn the lights off – LED will go out.
Battery Select Button
This button allows you to select which battery is
used as the power source for the vehicle, or which
battery is being charged by the on board charging
system if connected to the mains supply. The control
panel will automatically select the leisure battery
when the 12 volt system is turned on. The battery
select button must be pressed to manually select the
vehicle battery, the selected battery will be shown on
the EC480 control panel.
Reverse Polarity Indicator
This light is designed to illuminate when the live and
neutral mains input supply has been reversed
(crossed over). If the light illuminates then there is a
problem with either the site supply or the cable
connecting the supply to your vehicle.
Please note that if you choose to use your vehicle
with a generator this could also illuminate the
reverse polarity indicator. This is a normal side effect
when using some types generator and does not
necessarily indicate a fault. Please refer to your
generator handbook for further information.
Charger Button
The charger button turns on the internal battery
charger that will charge the batteries and provide
12 volt power to the interior of the vehicle. The
switch will illuminate when the switch is pushed in
and the vehicle is connected to the mains supply.
Space Heater Switch
The space heater switch will isolate the mains supply
to the space heater when the vehicle is plugged into
a suitable 230 volt supply. Press the button once to
turn the supply on – the button will stay in and the
button will illuminate, press the button again to turn
the supply off, the light will go out.
Water Heater Switch
The water heater switch will isolate the mains supply
to the water heater when the vehicle is plugged into
a suitable 230 volt supply. Press the button once to
turn the supply on – the button will stay in and the
button will illuminate, press the button again to turn
the supply off, the light will go out.
Cautionary Note
Apart from the changing of fuses and the
testing and resetting of the RCD and MCB’s no
maintenance is required on the PSU unit. If a
problem develops with your unit please contact
your supplying dealer or a qualified electrician.
EC500 Power Supply Unit
Owners Handbook :
5192 AT Frontier Owners Handbook V4 REPRO NCC_Layout 1 17/10/2011 15:50 Page 19
Seitenansicht 19
1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 69 70

Kommentare zu diesen Handbüchern

Keine Kommentare